Machine de découpage au jet d'eau de verre 2030 avec la pompe d'intensificateur 380Mpa

Instructions of the main parts of water jet cutting machine

A

The cutting table

1. Machine style: Bridge type

2. Processing dimension: 2000mm×3000mm

3. Z-axis journey is 150mm

4. Control accuracy: ±0.01mm

5. Cutting accuracy: ±0.1mm

6. Three-axis control, Auto zero positioning

7. Way of drive : Servo ( drives and motors are from Japan)

8. All screw and linear guide are ABBA brand from Taiwan

9.Seprated body

X beam of cutting table applies the one-off extrusion forming aluminum alloy

B

The intensifier pump

1.Type of pressurization is hydraulic. (The water is pressurized by using the fluid pressure intensification principle)

2.Max. oil discharge is 90 L/min

3.Max. water discharge is 3.7L/min

4.Max. diameter of orifice is 0.3mm

5.Max. operating pressure is380MPa

6.Continuous operating pressure is 330MPa

7.Power requirement : 30KW,380V/50HZ

8.Type of shift is electronic

9.maintenance free accumulator whose capability is 1.3L using American technology

10.Intensifier is Accustream from America

11. Touch screen

C

The CNC system

1. CNC control, apply 19 inch LCD

2. Adopt specialized waterjet cutting software, have autosave function for next operation.

3. Apply Omron brand PLC instead of relay

4. Windows XP based,Support DXF file and any auto programming software to produce NC code

The optional parts and price

Accessory parts

Function

Picture

Auto abrasive delivery System

New type pneumatic valve, reliable sensitive action, to overcome the simple way to control the sand amount only by negative pressure. A fundamental solution of sand blocked off , sand lack and other faults.

Reliable Anti-backwater design and accurate sand amount control panel, to avoid sand wetted , sand blocked off ,sand lack and other troubles because the cutting head backwater, to ensure the cutting continuity under any condition, meanwhile to accurately control the abrasive amount, effectively reduce the abrasive waste. This is the standard equipment of “Head” waterjet.

Deionization system

It is used for softening  the water, to improve the useful life of high pressure parts and cutting head